How to use the configuration utility:
First you will need to download the drivers. You only need to do this once.

Plug in USB data cable. Press and hold both power and shutter buttons down until the red light starts to fast flicker, then let go of buttons.

Wait for the drivers to download and install. Once the drivers have been installed you can now use the SetOut Tool by repeating steps above highlighted in red. Pressing both buttons will enable configuration mode.

Note: Date stamp must be set to On. "Date Stamp Logo" will appear next to the Time Stamp in your videos. You can add up to 16 digits (CAP letters or numbers). Below I added 2KOOL4U.COM to Date Stamp Logo.

As of now the Rotate Video 180 is reversed. Setting it to On the video is right side up, setting it to off the video will be upside down.