|
Power Button:
Press the power button for 3
seconds to turn camera on or off.
Use the power button to cycle thru modes
Red
Charging Indicator
Green
1080x720 30fps
Yellow
640x480 60fps
Blue
Photo Mode
Green-Yellow
Sound Recorder
Yellow-Blue
Driving Recorder
Shutter Button:
Press the shutter button to
start recording
Press the shutter button to take a photo
How to record 720P video
1080x720 30fps:
Press the power button to
turn camera ON. Use the power button to cycle thru modes to the (green)
LED. Press the shutter button to begin recording, the green led will flash
3 times then shut off (camera is now recording) Press the shutter button
to stop recording and enter "standby mode" or press the power button to
stop recording and enter "mode selection"
How to record VGA video
640x480 60fps:
Press the power button to
turn camera ON. Use the power button to cycle thru modes to the (yellow)
LED. Press the shutter button to begin recording, the yellow led will
flash 3 times then shut off (camera is now recording) Press the shutter
button to stop recording and enter "standby mode" or press the power
button to stop recording and enter "mode selection"
How to take a photo:
Press the power button to
turn camera ON. Use the power button to cycle thru modes to the (blue)
LED. Each time the shutter button is pressed a picture will be taken, the
blue LED will flash 3 times go off then back on again.
Photo sizes: (5MP)2592x1944
(3MP)2048x1536 (1.3MP)1280x1024
How to use Sound Recorder:
Press the power button to
turn camera ON. Use the power button to cycle thru modes to the
(green-yellow) LEDS. Press the shutter button to record sound. The green-
yellow LEDS will flash 3 times then go off (sound is now recording) Press
the shutter button to stop recording and enter "standby mode" or press the
power button to stop recording and enter "mode selection"
How to use Driving Recorder:
Press the power button to
turn camera ON. Use the power button to cycle thru modes to the
(yellow-blue) LEDS. Press the shutter button to start driving recorder.
The yellow-blue LEDS will continue to flash during recording (driving
recorder is now recording) Press the shutter button to stop recording and
enter "standby mode" or press the power button to stop recording and enter
"mode selection"
Note: Turn camera ON first
then connect USB car charger-cable. Driving mode uses loop recording then
saves recordings to a separate folder on SD card called "RECORDER", this
allows the camera to loop record without losing other pre-recorded videos
saved in the 100MEDIA folder
How to use as Web Cam:
Remove SD card. Plug in USB data cable
then turn camera ON. The green-yellow-blue LEDS will flash once. After web
cam drivers finish downloading use your
favorite webcam software such as 'AMCap' to view the live video.
How to use TV Out Function:
Option #1 Watch Pre-Recorded
Media:
Connect the video cable to
input ports on TV, yellow RCA jack connects to Video input, white RCA jack
connects to Audio input. Select the corresponding video mode on TV.
Connect the camera then turn power ON. TV will display pre-recorded media
on SD card (green-yellow-blue LEDS). Scroll thru recordings using the
power button (NEXT) Play recordings using the shutter button (PLAY)
Note: Holding the power
button for 3 seconds switches camera to Live Recording Mode
(see option #2)
Option #2 Record Live Media:
Pressing the power button
for 3 seconds enters live mode (green LED) You can use all functions
(record video, take photos, record sound)
Note: Holding the power
button for 3 seconds switches camera back to watch pre-recorded media
(see option #1)
|
