Stryker Glues and Fasteners

Stryker Basics

2K Custom Parts
Stryker Models
Flight Simulator
Center of Gravity
Adjusting /  Elevons
Painting / Sanding
Paint Designs
Glue Types
Repairs
Motor Mount
Adding CF Rods
Tape Hinges
Ubec
ABC Fuses
Prop Basics
AmpsWattsVolts
WaveosScope
Online Calculators
Video
 

2K Fun Stryker Build

UHU Por Glue: Specially made for styrofoam.

Elmers Carpenters Wood Glue: I found great for repairs such as cracked wings or broken foam around motor mount area that you don't want to come apart. Dries clear.

Velcro: strips could be used to hold the battery, receiver, nose cone or hatch.

Other Glues: Gorrilla Glue, Shoo Goo, Goop, Epoxy.

Tapes Standard packing tapes, Mesh tapes, Extreme tape, ect. The mesh tapes come in a few different styles with small threads embedded. Ive never had a problem with standard packing tape but if it should get a small cut it would travel across very fast. If mesh tape gets a cut it will stop at the next thread making it better than standard packing tapes.

DURO All Purpose Spay Adhesive. Excellent stuff! I use it to hold the nose cone on, it can be re-stuck many times if a crash knocks off the nose . I recently found a better use, its great for holding on the tail fins as they do come lose occasionally. Tip: Quick spray of Duro on both parts, wait couple minutes then stick parts together. I also found the tail fins wouldnt come back off, a few drops of rubbing alcohol un-sticks the adhesive just long enough to take it apart.