Ebay Stores |
|
Beetleonline
Eletech086 Power-gps Hxelepro360 Internet-shop365 Powerdigital898 |
|
Specifications |
|
Camera Specs |
|
Basic
Operation C1 |
|
Power Button:
Press power button for 3 seconds
to turn camera ON/OFF
The power button also used to "view previous video" when using TV out.
Shutter Button:
Pressing the shutter button Starts/Stops recording.
The shutter button also used to "view next video" when using TV out.
Mode Button:
The mode button selects the different resolutions and frame rates.
To switch modes click the shutter button to stop any recordings
first (solid
led)
Press the mode button to switch to 720P 60fps (Green led)
Press mode again will switch to Photo mode (Orange led)
Press mode again
will switch to parking mode (alternating red/green leds)
Press mode again goes back to 1080P 30fps (Red led)
To continue recording in
selected modes or take a picture press the shutter button.
Using TV out the mode button also switches between 1080P, 720P, Photo, Playback
mode.
See mode colors shown below.
|
In Camera
Formatting C1 |
|
With camera off or
using USB in charging
mode press and hold both power and shutter buttons together until the green led
starts to flash, when format has completed (about 5 seconds) the camera will
shut off.
Note: This will completely erase everything on SD card. |
|
Configuration C1 |
|
Basic Settings and How They Work
here |
|
WebCam Mode C1 |
|
Remove SD card. With USB connected
(charging mode) press and HOLD shutter button then press the power
button, wait about 5 seconds before releasing shutter. If this is
the first time using web cam mode drivers will automatically download
to your PC. After drivers have installed (Repeat) In charging mode
press both power and shutter buttons again to start web cam mode. Open
your favorite web cam software such as
AMCap to view the live video.
640x480
Note: Web cam
mode and In Camera Formatting use the same buttons so dont forget to
remove SD card. |
|
Charging |
|
USB takes about 2 hours 20 minutes
to fully charge if the battery is completely empty. When charging the
yellow led will remain solid, when fully charged the red led will shut
off. |
|
TV Out C1 |
|
Using the Audio/Video
cable connect camera to TV or Monitor. The RED and YELLOW cable leads plug
into matching RED (audio) and YELLOW (video) video inputs on TV.
To stop a recording press the shutter button.
In standby mode (solid led) you can press the mode button to cycle thru
modes.
1080P 30fps (Red led)
720P 60fps (Green led)
Photo mode (Orange led)
Media playback (Orange led)
In media playback mode the shutter button is used as the (next) button
and the power button is used as the (previous) button. |
|
Firmware C1 |
|
C1 Firmware March 13 2014 |
|
Original Manual
C1 |
|
PDF Manual
Trouble Shooting
Camera Freezing |
|
Configuration
Software C1 |
|
Windows software to configure
settings using USB connection.
Can also be used to download and install latest firmware.
Ez_Configuration |
|
Inside the Innovv C1 |
|
Take a
closer look
at the internal parts of
the Innovv C1 |
|
|
Pros / Cons C1 |
|
Pros:
Stylish design. Sharp clear
videos and pictures. Very
bright integrated flashlight. Using the configuration utility (GUI) you can
create your own settings. You can also view videos and pictures directly
from camera to tv using A/V cable.
Cons:
Switch on side hard get at as it sits slightly inside the case. Sometimes
videos of sky get a slight blue tint.
This is what the time stamp looks like on the Innovv C1 HD cam.
The time/date have a clear background located at the bottom right of each
video (if time is used).
|
|
1080/720P
HD Action Camera -
Innovv C2 Wide Angle
|
|
Ebay Stores |
|
Beetleonline
Eletech086 Power-gps Hxelepro360 Internet-shop365 Powerdigital898 |
|
Specifications |
|
Camera Specs |
|
Basic Operation
C2 |
|
Power Button:
Press power button for 3 seconds
to turn camera ON/OFF
The power button also used to "view previous video" when using TV out.
Shutter Button:
Pressing the shutter button Starts/Stops recording.
The shutter button also used to "view next video" when using TV out.
Mode Button:
The mode button selects the different resolutions and frame rates.
To switch modes click the shutter button to stop any recordings
first (solid
led)
Press the mode button to switch to 720P 60fps (Green led)
Press mode again will switch to Photo mode (Orange led)
Press mode again
will switch to parking mode (alternating red/green leds)
Press mode again goes back to 1080P 30fps (Red led)
To continue recording in
selected modes or take a picture press the shutter button.
Using TV out the mode button also switches between 1080P, 720P, Photo, Playback
mode.
See mode colors shown below.
|
|
In Camera
Formatting C2 |
|
With camera off or
using USB in charging
mode press and hold both power and shutter buttons together until the green led
starts to flash, when format has completed (about 5 seconds) the camera will
shut off.
Note: This will completely erase everything on SD card. |
|
Configuration C2 |
|
Basic Settings and How They Work
here |
|
WebCam Mode C2 |
|
Remove SD card. With USB connected
(charging mode) press and HOLD shutter button then press the power
button, wait about 5 seconds before releasing shutter. If this is
the first time using web cam mode drivers will automatically download
to your PC. After drivers have installed (Repeat) In charging mode
press both power and shutter buttons again to start web cam mode. Open
your favorite web cam software such as
AMCap to view the live video.
640x480
Note: Web cam
mode and In Camera Formatting use the same buttons so dont forget to
remove SD card. |
|
Charging |
|
USB takes about 2 hours 20 minutes
to fully charge if the battery is completely empty. When charging the
yellow led will remain solid, when fully charged the red led will shut
off. |
|
TV Out C2 |
|
Using the Audio/Video
cable connect camera to TV or Monitor. The RED and YELLOW cable leads plug
into matching RED (audio) and YELLOW (video) video inputs on TV.
To stop a recording press the shutter button.
In standby mode (solid led) you can press the mode button to cycle thru
modes.
1080P 30fps (Red led)
720P 60fps (Green led)
Photo mode (Orange led)
Media playback (Orange led)
In media playback mode the shutter button is used as the (next) button
and the power button is used as the (previous) button. |
|
Firmware C2 |
|
C2 Firmware March 13 2014 |
|
Original Manual
C2 |
|
PDF Manual |
|
Configuration
Software C2 |
|
Windows software to configure
settings using USB connection.
Can also be used to download and install latest firmware.
Ez_Configuration |
|
Pros / Cons C2 |
|
Pros:
Stylish design. Sharp clear
videos and pictures. Very
bright integrated flashlight. Using the configuration utility (GUI) you can
create your own settings. You can also view videos and pictures directly
from camera to tv using A/V cable.
Cons:
Switch on side hard get at as it sits slightly inside the case. Sometimes
videos of sky get a slight blue tint.
This is what the time stamp looks like on the Innovv C2 HD cam.
The time/date have a clear background located at the bottom right of each
video (if time is used).
|
|
1080/720P
HD Action Camera -
Innovv C3 Snake Cam
|
|
Ebay Stores |
|
Beetleonline
Eletech086 Power-gps Hxelepro360 Internet-shop365 Powerdigital898 |
|
Specifications |
|
Camera Specs |
|
Basic
Operation C3 |
|
Power Button:
Press power button for 3 seconds
to turn camera ON/OFF
The power button also used to "view previous video" when using TV out.
Shutter Button:
Pressing the shutter button Starts/Stops recording.
The shutter button also used to "view next video" when using TV out.
Mode Button:
The mode button selects the different resolutions and frame rates.
To switch modes click the shutter button to stop any recordings
first (solid
led)
Press the mode button to switch to 720P 60fps (Green led)
Press mode again will switch to Photo mode (Orange led)
Press mode again
will switch to parking mode (alternating red/green leds)
Press mode again goes back to 1080P 30fps (Red led)
To continue recording in
selected modes or take a picture press the shutter button.
Using TV out the mode button also switches between 1080P, 720P, Photo, Playback
mode.
See mode colors shown below.
|
|
In Camera
Formatting C3 |
|
With camera off or
using USB in charging
mode press and hold both power and shutter buttons together until the green led
starts to flash, when format has completed (about 5 seconds) the camera will
shut off.
Note: This will completely erase everything on SD card. |
|
Configuration C3 |
|
Basic Settings and How They Work
here |
|
WebCam Mode C3 |
|
Remove SD card. With USB connected
(charging mode) press and HOLD shutter button then press the power
button, wait about 10 seconds before releasing shutter. If this is
the first time using web cam mode drivers will automatically download
to your PC. After drivers have installed (Repeat) In charging mode
press both power and shutter buttons again to start web cam mode. Open
your favorite web cam software such as
AMCap to view the live video.
640x480
Note: Web cam
mode and In Camera Formatting use the same buttons so dont forget to
remove SD card. |
|
Charging |
|
USB takes about 2 hours
30 minutes
to fully charge if the battery is completely empty. When charging the
yellow led will remain solid, when fully charged the led will shut
off.
|
|
TV Out C3 |
|
Using the Audio/Video
cable connect camera to TV or Monitor. The RED and YELLOW cable leads plug
into matching RED (audio) and YELLOW (video) video inputs on TV.
To stop a recording press the shutter button.
In standby mode (solid led) you can press the mode button to cycle thru
modes.
1080P 30fps (Red led)
720P 60fps (Green led)
Photo mode (Orange led)
Media playback (Orange led)
In media playback mode the shutter button is used as the (next) button
and the power button is used as the (previous) button. |
|
Firmware C3 |
|
C3 Firmware December 11 2014 |
|
Original Manual
C3 |
|
PDF Manual |
|
Configuration
Software C3 |
|
Windows software to configure
settings using USB connection.
Can also be used to download and install latest firmware.
Ez_Configuration |
|
Pros / Cons C3 |
|
Pros:
Stylish design. Sharp clear
videos and pictures. Very
bright integrated flashlight. Using the configuration utility (GUI) you can
create your own settings. You can also view videos and pictures directly
from camera to tv using A/V cable.
Cons:
Mounting brackets fit lens very tight, making it hard to insert or remove lens.
Finding the top side of lens should be marked more clearly. Lens must be
also be connected in order to download recorded media to pc, without lens
connected camera can only be charged.
This is what the time stamp looks like on the Innovv C3 HD cam.
The time/date have a clear background located at the bottom right of each
video (if time is used).
|
|
1080/720P
HD Action Camera -
Innovv C4 WiFi
Pre-released,
Updating
|
|
Ebay Stores |
|
Beetleonline
Eletech086 Power-gps Hxelepro360 Internet-shop365 Powerdigital898 |
|
Specifications |
|
Camera Specs |
|
Basic Operation
C4 |
|
NOTE: As new options are added this
page will be updated.
Power Button:
Press power button
to turn camera ON (blinking red recording)
Press and hold power button 3 seconds to turn camera OFF
Shutter Button:
Pressing the shutter button Starts/Stops recording.
Mode Button:
The mode button selects the different resolutions and frame rates.
To switch modes click the shutter button to stop any recordings
first (solid
led)
Press the mode button to switch to 720P 60fps (Green led)
Press mode again will switch to Photo mode (Yellow led)
Press mode again
to switch to Motion Detect mode (alternating red/Blue leds)
Press mode again goes back to 1080P 30fps (Red led)
To continue recording in
selected modes or take a picture press the shutter button.
See mode colors shown below.
|
|
In Camera
Formatting C4 |
|
Using any (solid color
led) press and hold the shutter button for 10 seconds.
Note: This will erase everything on SD card. |
|
WiFi
Configuration C4 |
|
Turn camera On and
press the shutter button to enter standby mode (solid led)
Press and hold the mode button on camera.
A solid blue/red (purple) means the camera is now in Wifi mode.
Open settings on phone or tablet and check for connection to camera called
"Action DVR"
Select Action DVR and type the password "00000000" which is default
unless changed.
Now connected thru WiFi you can use the free app called "IsmartDV" to
operate camera.
WiFi range up to 30 feet. |
|
WebCam Mode C4 |
|
Note: You will need to download and install the
web cam drivers and the latest
firmware below to use web cam.
Plug in USB to
start camera (bright red led). Press and hold mode button for 3
seconds. Open your favorite web cam software such as
AMCap to view the live video.
640x480 |
|
Charging |
|
USB takes about 2 hours 20 minutes
to fully charge if the battery is completely empty. When charging the
dim red led will remain solid, when fully charged the red led will shut
off.
Note: There is a
bright red led and a dim red led. The bright red led is data transfer
mode. The dim red led is charging mode. With USB connected press the
power button 3 seconds to change modes. The battery still charges in
data transfer mode but the bright red led does not shut off when
charge is complete, only the dim red led will shut off when charge is
complete. |
|
TV Out C4 |
|
Using the Audio/Video
cable connect camera to TV or Monitor. The RED and YELLOW cable leads plug
into matching RED (audio) and YELLOW (video) video inputs on TV.
How it works:
Image Diagram |
|
|
Firmware C4 |
|
C4 Firmware March 9 2015
C4 Firmware March 24 2015 |
|
Original Manual
C4 |
|
Manual
Fix C4 Bricked Camera |
|
Assemble-Disassemble |
|
How-To Video |
|
Configuration
Software C4 |
|
Windows software to configure
settings using USB connection.
There is still a couple firmware bugs but since the previous firmware only
had 4 settings
you now have 10 more settings to try out until new firmware is available.
Ez_Configuration |
|
Pros / Cons C4 |
|
Pros:
Unknown
Cons:
Unknown
This is what the time stamp looks like on the Innovv C4 HD cam.
The time/date have a clear background located at the top left of each
video (if time is used).
|